This article's RTX 3070 Mining Settings are applicable to all models. The Silicon Lottery is the primary distinction between models and GPU to GPU. This implies that depending on your luck with the hardware, your GPU may perform worse or better.
This is some tested version of RTX 3070 :
b08l8jntxq
b08kwn2lzg
b08lw46gh2
b08m14y3c7
b08m13dxsz
b08kwlmzv4
b08l8lg4m3
3070 3dmark
b08kwpdxjz
b08l8l71sm
b08l8l9tcz
The mining profitability that will be presented is based on data from WhatToMine.com; it is a decent approximation of what you will make, but keep in mind that these figures are subject to change! Use the overclocks listed below to get the best performance and efficiency.
RTX 3070 Ethash (ETH) Mining Overclocks:
- Core Voltage (VDD): N/A
- Power Limit (%): 55% or 130w
- Core Clock (CClock): -200
- Memory Clock (MClock): +1300 or 2600
- Fan Speed (%): 70% ± based on your temps.
RTX 3070 Octopus (CoinFlux)Mining Overclocks:
- Core Voltage (VDD): N/A
- Power Limit (%): 60% or 150w
- Core Clock (CClock): 100
- Memory Clock (MClock): +1000 or 2000
- Fan Speed (%): 70% ± based on your temps.
RTX 3070 KawPow (RVN) Mining Overclocks:
- Core Voltage (VDD): N/A
- Power Limit (%): 60% or 150w
- Core Clock (CClock): 100
- Memory Clock (MClock): +1000 or 2000
- Fan Speed (%): 70% ± based on your temps.
If you don't get this results maybe you have an lhr version. In the Ethash Algorithm, LHR reduces a GPU's mining capabilities by up to 75%. Some RTX 3070s are affected by LHR.
in this case you should be use NBminer (LHR unlocked) or T-rex (LHR unlocked) .